Self-Priming Jet Pump, JET Series

The JETA series are injection type clean water pumps, which are composed of a centrifugal pump and a nozzle, have the advantages of beautiful design, self-priming in short time, reliable performance, high head and deep suction. They are suitable for pumping clean water and non-aggressive liquid.

Features and Technical Parameters
Operating Limitations
Max ambient temperature up to 40℃
Max fluid temperature up to 40℃
Max pressure up to 10 bar

Construction Features
Pump Body: Cast iron
Motor Housing: Aluminum
Shaft: 45# Steel/Stainless Steel
Impeller: Brass/Stainless Steel/PPO optional
Motor: Closed, externally ventilated
Insulation Class: B/F
Protection Class: IP44/IP54
Duty: Continuously rated
Mechanical Seal: Ceramic steatite/metalized carbon

Application
They are particularly suitable for domestic applications such as supply water from well, pool etc, the automatic distribution of water by surge tanks and pressure switch, gardening, and pressure boosting etc..

Precautions for Use
Pumps should be installed in a covered area, protected against the weather.


Contact Details

    • Phone: 0020403333248 - 0020403335884
    • Branch Phone: 0020403422166
    • Fax: 0020403355670
    • Email : sfb@sfbmotor.com
    • Website : www.sfbmotor.com

Address

Main Branch : SFB Motors Company - Al Qantara Street - Tanta - Egypt
Branch : Almoderia Aalbahary St  Front Mogamah Almahkem - Tanta - Egypt
Factory : SFB Engineering Industries - Hassan Shehata St - Tanta - Egypt

© 2017 SFB Motor co. All Rights Reserved.